Description

Hyster S6.0FT, S7.0FT Forklift Truck D024 Series Repair Manual (EU)

Repair Manual for Hyster D024 Series, Models: S6.0FT, S7.0FT (Europe)
Format: PDF
English

• Hyster S6.0FT, S7.0FT Forklift Truck D024 Series Repair Manual (EU): 9701 Pages

Hyster D024 Series, Models: S6.0FT, S7.0FT (Europe) Manual Table Of Content:

B4.5RGT – Shop Manual (Overhaul) 1991
Cooling System
Frame
GM Engine Repair V6 4.3L Engine
LPG Fuel System (GM 4.3L)
High Voltage Switch (HVS) Ignition GM 4.3L EPA Compliant Engines
Transmission Repair (Dana Spicer) 3X2
Transmission Repair (Dana Spicer) 2X2
Drive Axle And Differential Assembly Repair (Wet Brake)
Brake System
Steering Axle
Hydraulic Gear Pump
Main Control Valve
Cylinders Repair
Mast Repair
Wire Harness Repair
User Interface – Supervisor
User Interface – Service
Electrical System
Metric And Inch (SAE) Fasteners
Calibrations
Schematics Diagrams
Periodic Maintenance
Capacities And Specifications
Diagnostics Troubleshooting
Memory Integrity Fault

The Service Repair Manual are updated on a regular basis, but may not reflect recent design changes to the product. Updated technical service information may be available from our website.

The Service Repair Manual provide general guidelines for maintenance and service  of the D024 Series, Models: S6.0FT, S7.0FT (Europe)and are intended for use by trained and experienced technicians. Failure to properly maintain equipment or to follow instructions contained in the Service Manual could result in damage to the products, personal injury, property damage or death.

• When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support the weight of the load.

• Do not lift heavy parts by hand, use a lifting mechanism.

• Wear safety glasses.

• DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift trucks. Disconnect the battery ground cable on internal combustion lift trucks.

• Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT TRUCK ON BLOCKS in the Operating Manual or the Periodic Maintenance section.

Caution:

• Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit needs repairs.

• Be sure to follow the WARNING and CAUTION notes in the instructions.

• Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are flammable.

• Be sure to follow the necessary safety precautions when handling these fuels and when working on these fuel systems.

• Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the area. Make sure the area is well ventilated.