Komatsu PC158US-2 Excavator Service Manual

Description

Table of Contents

01 GENERAL ……………………………………………………………………………………………… 01-1
10 STRUCTURE AND FUNCTION ………………………………………………….. 10-1
20 TESTING AND ADJUSTING ………………………………………………………. 20-1
30 DISASSEMBLY AND ASSEMBLY …………………………………………….. 30-1
40 MAINTENANCE STANDARD ……………………………………………………… 40-1
90 OTHERS ………………………………………………………………………………………………… 90-1

GENERAL
This section lists the general machine dimensions, performance specifications, component weights, and fuel, coolant and lubricant specification charts.

STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
This section explains the structure and function of each component. It serves not only to give an understanding of the structure, but also serves as reference material for troubleshooting.

TESTING, ADJUSTING AND TROUBLESHOOTING
This section explains checks to be made before and after performing repairs, as well as adjustments to be made at completion of the checks and repairs. Troubleshooting charts correlating Problems to Causes are also mention in this section.

DISASSEMBLY AND ASSEMBLY KOMATSU Excavator PC158US-2

This section explains the order to be followed when removing, installing, disassembling or assembling each component, as well as precautions to be taken for these operations.

When raising heavy components, use a hoist or crane. Check that the wire rope, chains and hooks are free from damage.
Always use lifting equipment which has ample capacity. Install the lifting equipment at the correct places. Use a hoist or crane and operate slowly to prevent the component from hitting any other part. Do not work with any part still raised by the hoist or crane.
•

MANUAL EXTRACT – ASSEMBLY OF TRACK ROLLER

1. Using push tool (D, press fit bushings (9) and (10) to roller (4).

2. Assemble collar (8) to shaft (5).

3. Using tool M1, install floating seal (6) to shaft (5). * When assembling the floating seal, clean the contact surface of O-ring (6c) and floating seal (6a), remove all grease and oil, and dry it. Make sure that no dirt or dust sticks to the contact surface of the floating seal.

4. Using tool M1, install floating seals (6) and (3) to roller (4). * For details of the precautions when installing floating seals (6b) and (6d), and (3b) and (3d), see the precautions marked * for Step 3.

5. Assemble shaft (5) to roller (4).

6. Turn over roller (4) and shaft (5) assembly.

7. Using tool M1, install floating seal (3) to collar (2). * For details of the precautions when installing floating seals (3a) and (3c), see the precautions marked * for Step 3.

8. Assemble collar (2) to shaft (5), and install pin (1 ).