Description

Kubota M8560, M9960 Tractor Workshop Service Manual

Kubota Tractor Model M8560, M9960
Publication: 9Y111-06860
Format: PDF
Language: English and French
Kubota M8560, M9960 Tractor Workshop Manual – 715 Pages (English Version)
Kubota M8560, M9960 Tractor Workshop Manual – 736 Pages (French Version)

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the M8560 and M9960. It contains 4 parts: “Information”, “General”, “Mechanism”
and “Servicing”.
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
Servicing
This section primarily contains Kubota M8560, M9960 below information.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing Regarding the servicing of Common Rail System (CRS), refer to “DIAGNOSIS MANUAL”
(9Y111-01920).
Regarding the servicing of Diesel Particulate Filter (DPF), refer to “DIESEL PARTICULATE FILTER HANDLING MANUAL” (9Y111-08130).
All illustrations, photographs and specifications contained in this manual are of the newest information available at the time of publication.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING

a Operate the Kubota M8560, M9960 Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor M8560, M9960 Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.