Komatsu PC130-7 Excavator Service Manual

Description

Table of Contents

01 GENERAL ………………………………………………………………………………………………….01-1
10 STRUCTURE AND FUNCTION………………………………………………………..10-1
20 TESTING AND ADJUSTING ……………………………………………………………..20-1
30 DISASSEMBLY AND ASSEMBLY ………………………………………………….30-1
40 MAINTENANCE STANDARD…………………………………………………………….40-1
90 OTHERS ……………………………………………………………………………………………………..90-1

1. Composition of shop manual

This shop manual contains the necessary technical information for services performed in a workshop. For
ease of understanding, the manual is divided into the following sections.

01. GENERAL
This section explains the specifications of the machine for the Excavator.

10. STRUCTURE AND FUNCTION, MAINTENANCE STANDARD
This section explains the structure, function, and maintenance standard values of each component.
The structure and function sub-section explains the structure and function of each component. It serves not only to give an understanding of the structure, but also serves as reference material for troubleshooting. The maintenance standard sub-section explains the criteria and remedies for disassembly and service.

20. TESTING AND ADJUSTING
Standard value table
This section explains the standard values for new machine and judgement criteria for testing, adjusting, and troubleshooting. This standard value table is used to check the standard values in testing and adjusting and to judge parts in troubleshooting.

Testing and adjusting
This section explains measuring instruments and measuring methods for testing and adjusting, and method of adjusting each part. The standard values and judgement criteria for testing and adjusting are explained in Testing and adjusting.

Troubleshooting
This section explains how to find out failed parts and how to repair them. The troubleshooting is divided by failure modes. The S mode of the troubleshooting related to the engine may be also explained in the Chassis volume and Engine volume. In this case, see the Chassis volume.

30. DISASSEMBLY AND ASSEMBLY Excavator
This section explains the special tools and procedures for removing, installing, disassembling, and assembling each component, as well as precautions for them. In addition, tightening torque and quantity and weight of coating material, oil, grease, and coolant necessary for the work are also explain.

40. MAINTENANCE STANDARD
This section gives the judgment standards for inspection of disassembled parts.
The contents of this section may be described in STRUCTURE AND FUNCTION.

90. OTHERS (chassis volume)/Repair and replacement of parts (engine volume)
• Chassis volume
This section gives hydraulic circuit diagrams and electrical circuit diagrams.
• Engine volume
This section explains the method of reproducing, repairing, and replacing parts.

TESTING AND ADJUSTING FAN BELT TENSION
1. Open the engine hood and remove the belt cover from above the alternator.
2. Press the intermediate point of the belt between the fan pulley and alternator pulley with a finger and measure deflection (a) of the belt.
• Force to press belt: Approx. 58.8 N {6 kg} Deflection (a): 6 10 mm