Description

Komatsu 330M Haulpak Dump Truck Service Repair Manual

Language: English
Komatsu Dump Truck 330M Model
Publication: DG666 & DG745
SERIAL NUMBERS:  85001 and up

• Komatsu 330M Dump Truck Service Manual – 571 Pages
• Komatsu 330M Dump Truck Operation and Maintenance Manual – 142 Pages

Table of Content of the Manual:

GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A
STRUCTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B
ENGINE, FUEL, COOLING AND AIR CLEANER . . . . . . . . . . . . . . . . . . . . . . . . . . C
ELECTRIC SYSTEM (24 VDC. NON-PROPULSION) . . . . . . . . . . . . . . . . . . . . . . . . D
TRANSMISSION AND TORQUE CONVERTER . . . . . . . . . . . . . . . . . . . . . . . . . . . F
DRIVE AXLE, SPINDLES AND WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G
SUSPENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
BRAKE CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J
AIR SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K
HYDRAULIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L
OPTIONS AND SPECIAL TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
OPERATOR’S CAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N
LUBRICATION AND SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P
ALPHABETICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q
SYSTEM SCHEMATICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R
A00013

This Manual is written for use by the service technician and is designed to help the technician become fully knowledgeable of the truck and all its systems in order to keep it running and in production. All maintenance personnel should read and understand the materials in this manual before performing maintenance and/or operational checks on the truck. All safety notices, warnings and cautions should be understood and followed when accomplishing repairs on the truck.

The first section covers component descriptions, truck specifications and safe work practices, as well as other general information. The major portion of the manual pertains to disassembly, service and reassembly. Each major serviceable area is dealt with individually. For example: The disassembly, service and reassembly of the radiator group is discussed as a unit. The same is true of the engine and engine accessories, and so on through the entire mechanical detail of the truck. Disassembly should be carried only as far as necessary to accomplish needed repairs.
The illustrations used in this manual are, at times, typical of the component shown and may not necessarily depict a specific model.

This manual shows dimensioning of U.S. standard and metric (SI) units throughout and all references to “Right”, “Left”, “Front”, or “Rear” are made with respect to the operator’s normal seated position, unless specifically stated otherwise.

Standard torque requirements are shown in torque charts in the general information section and individual torques are provided in the text in bold face type, such as 100 ft.lbs. (135 N.m) torque. All torque specifications have ± 10% tolerance unless otherwise specified.

A Product Identification plate is normally located on the truck frame upright in front of the left side front wheel and designates the Truck Model Number, Product Identification Number (vehicle serial number), and Maximum G.V.W. (Gross Vehicle Weight) rating.

The HAULPAK® Model designation consists of three numbers and one letter (i.e. 330M). The three numbers represent the basic truck model. The letter “M” designates a Mechanical drive and the letter “E” designates an Electrical propulsion system.