Description

Kobelco SK008-1E Hydraulic Excavator Repair Service Manual

Manual for: Excavator SK008-1E
Format: PDF
English
Shop Manual Publication S5PT0007E01

• Kobelco SK008-1E Excavator Service Manual – 338 Pages

SERVICE MANUAL TABLE OF CONTENT

• General Cautions for Maintenance Work
• Technical Data
• Service Standards
• Engine
• Hydraulic System
• Hydraulic Equipment
• Adjument and Repair
• Periodic Inspection and Servicing
• Fuel, Lube, Oil and Gas
• Troubleshooting
• Reference Data

The SK008-1E Preface Instructions

Read and understand all Warning plates and decal on the machine before Operating, Maintaining or Repairing this machine. The Kobelco SK008-1E Repair Manual has been written for the repair specialist. The serviceman or mechanic may be unfamiliar with many of the systems on this machine. This makes it important to use this manual and be caution when performing service work.

Please go carefully through the manual of the excavator before starting any repair work. Use proper lifting procedures when removing any components. Be careful when removing filler caps, breathers and plugs on the machine. Hold a rag over the cap or plug to prevent being sprayed or splashed by liquids under pressure. The danger is even greater if the machine has just been stopped because fluids can be hot.

Use the Shop/Service Manual of the SK008-1E as a reference book and source of information even if you are familiar with Excavator technology. Using the Repair Manual, the experience construction machine mechanic can carry out any necessary repairs expertly.

Sections of the Manual

This Manual is prepared as a technical material in which the information necessary for the maintenance and repairing services of our hydraulic excavators are collected, and is categorized into 7 Chapters, Specification, Maintenance, System, Disassembly, Troubleshooting, Engine, and Installation Procedures for Optional Attachment.

When operating the machine after disassembly or parts replacement of the hydraulic equipment, piping, etc., be sure to release air from the hydraulic system. This is necessary to prevent seizure and cavitation of the hydraulic equipment. If the air is left in the hydraulic system, the air is compressed or expanded depending on the load, having an adverse effect on the smooth operation of the hydraulic equipment and shortening the service life.

The number is assigned to every part handled in this Manual on account of the description, but the parts, which cannot be supplied as service parts are contained.