Description

Takeuchi TB108 Compact Excavator Service Manual

Type: Excavator TB108
Format: PDF
Language of the Manual: English

Takeuchi TB108 Service Manual – 355 Pages
Takeuchi TB108 Operating Manual – 170 Pages
Parts Manual for TB108 – 257 Pages
Engine Manual for 2TNE68-ETBA – 46 Pages
Engine Manual for 2TNV70-PTB- 40 Pages

For All applicable S/N

The manual describes operation, service, repair and maintenance of the excavator, as well as safety instructions that should be follow.

The Takeuchi TB108 manual is intended for persons who engage in maintenance operations, and explains procedures for disassembly and reassembly of the machine, check and maintenance procedures, maintenance reference values, troubleshooting and outline specifications, etc. Please use this Takeuchi manual for excavator TB108 as a reference in service activities to improve maintenance techniques.
Please note that the contents and diagrams included in this manual may not match your machine exactly.

Items or diagram which manual contains are subject to change without notice due to design modifications, etc. Always store the Takeuchi excavator manual near at hand preferably on the machine itself. When transferring ownership of this machine, be sure to provide the owner manual to the next owner.

Table of Content of TB108 Instructions Manual:

I . GENERAL
II . SPECIFICATIONS
III. MACHINE CONFIGURATION
IV. HYDRAULIC UNITS
V . TROUBLESHOOTING
VI. ENGINE

Before operating, perform the prescribe inspections and make repairs immediately should any irregularities be found. If a failure that causes loss of control such as steering, service brakes or engine occurs, stop the machine motion as quickly as possible, follow the shutdown procedure, and keep machine securely park until the problem is fixed.

Extract from the Service Manual:

(1) Visual check around engine.
If any problem is found, do not use before the engine repairs have been completed.
• Oil leak from the lubrication system Fuel leak from the fuel system
• Cooling water leak from the cooling water system Damaged parts
• Loosened or lost bolts
• Fuel, radiator rubber hoses, V belt cracked, loosened clamp (2) Fuel tank level check and fuel supply Check the remaining fuel oil level in the fuel tank and refuel the recommended fuel if necessary. (Refer to 1.3.1
(3) Lube oil level check and replenishment (a)Checking oil level
Check the lube oil level with the dipstick, after adjusting the posture of the machine unit so that an engine may become a horizontality. Insert the dipstick fully and check the oil level. The oil shall not be contaminated heavily and have appropriate viscosity. No cooling water or diesel fuel shall be mixed.
When lube oil is supplied after the engine running, check the lube oil level after about 10 minutes pass after the engine shutdown so that the lube oil inside may be returned to the oil pan.
Standard
The level shall be between the upper and lower limit lines on the dipstick.