Kubota RTV400CI Utility Vehicle Workshop Manual

Kubota RTV400CI Utility Vehicle Workshop Manual


Format: PDF
Language: English
Kubota RTV400CI Utility Vehicle Workshop Manual – 311 Pages

Categories: ,


Kubota RTV400CI Utility Vehicle Workshop Manual

Kubota Utility Vehicle Model RTV400CI
Publication: 9Y111-07100
Format: PDF
Language: English
Kubota RTV400CI Utility Vehicle Workshop Manual – 302 Pages

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the RTV400Ci. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / Utility Vehicle mechanism that this workshop manual does not include.
Servicing RTV400CI Utility Vehicle
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing

Your KUBOTA dealer is always ready to help so that your Utility Vehicle offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in RTV400CI Utility Vehicle workshop service manual.

Replacing Fuse Kubota RTV400CI Utility Vehicle

Before replacing a blown fuse, determine why the fuse blew and make any necessary repairs. Failure to follow this procedure may result in serious damage to the vehicle electrical system.
 Replacement procedure
1. Disconnect the negative cable of the battery.
2. Remove the cover and the fuse box cover.
3. Pull out the blown fuse using fuse puller in the fuse box.
4. Insert a new fuse into the fuse box.
5. Install the fuse box cover.
6. Connect the negative battery cable.


  • Workshop Manual
    Group 1 Precautions for disassembling and
    Group 2 Tightening Torque
    Group 3 Painting
    Group 4 Bleeding Air from Hydraulic Oil Tank
    Group 1 Cab
    Group 2 Counterweight
    Group 3 Main Frame
    Group 4 Pump Device
    Group 5 Control Valve
    Group 6 Swing Device
    Group 7 Pilot Valve
    Group 8 Pilot Shut-Off Valve
    Group 9 Signal Control Valve
    Group 10 Travel Shockless Valve
    Group 11 Solenoid Valve
    Group 12 Pilot Relief Valve
    Group 13 Steering Valve
    Group 14 Brake Valve
    Group 15 Accumulator Charging Valve
    Group 16 Transmission Control Valve
    Group 1 Swing Bearing
    Group 2 Travel Motor
    Group 3 Center Joint
    Group 4 Transmission
    Group 5 Axle
    Group 6 Axle Lock Cylinder
    Group 7 Operate-Check Valve
    Group 8 Propeller Shaft
    Group 1 Front Attachment
    Group 2 Cylinder
    Group 3 Hose-Rupture Safety Valve
    Group 4 Operate-Check Valve

    Service Manual (Troubleshooting)
    Group 1 Introduction
    Group 2 Standard
    Group 3 Engine Test
    Group 4 Utility Vehicle Test
    Group 5 Component Test
    Group 6 Adjustment
    Group 1 General
    Group 2 Component Layout
    Group 3 Troubleshooting A
    Group 4 Troubleshooting B
    Group 5 Troubleshooting C
    Group 6 Electrical System Inspection
    Group 7 ICX


There are no reviews yet.

Be the first to review “Kubota RTV400CI Utility Vehicle Workshop Manual”

You've just added this product to the cart: