Kubota KC250H, KC250HR Dumper Workshop Manual

Kubota KC250H, KC250HR Dumper Workshop Manual

$22.00

Format: PDF
Language: English
Kubota KC250H, KC250HR Dumper Workshop Manual – 58 Pages

Categories: ,
  • Description
  • Table of Content
  • Reviews (0)

Description

Kubota KC250H, KC250HR Dumper Workshop Manual

Kubota Dumper Model KC250H, KC250HR
Format: PDF
Language: English
Kubota KC250H, KC250HR Dumper Workshop Manual – 58 Pages

Table of Content of the Workshop Service Manual

1.1 Purpose of ThisKC250H, KC250HR Dumper Manual
The purpose of this manual is to provide the technician with detailed information so that they will
know the structure and proper method of servicing concerning this machine.
This manual has been prepared for people who are familiar with how to operate and control this
machine.
1.2 Composition of This Manual
This manual gives information by dividing it into the following chapters:
1. Introduction
This Chapter describes the purpose and formation of this manual and information and data
necessary for the maintenance of this vehicle.
2. Service Data
This Chapter describes the names and functions of the parts, specification, and product
number position of this vehicle.
3. Removal and Installation of Covers
This Chapter describes the formation of the safety covers installed in this vehicle.
4. Engine
This Chapter describes the information on the dismounting of the engine.
5. Driveline and Chassis
This Chapter describes the information on the structure and maintenance (disassembly,
reassembly, adjustment) of the driveline and chassis.
6. Steering System
This Chapter describes the information on the maintenance (adjustments) of the steering
system.
7. Vessel
This Chapter describes the information on the structure and maintenance (disassembly,
reassembly, adjustment) of the vessel.
8. Electrical Equipment
This Chapter describes the information on the electrical parts.
9. Hydraulic Equipment
This Chapter describes the information on the structure and maintenance (disassembly,
reassembly, adjustment) of the parts of the hydraulic devices.
10. Troubleshooting
This Chapter describes the causes of troubles and remedial measures for each trouble.

Your KUBOTA dealer is always ready to help so that your Dumper offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in KC250H, KC250HR Dumper workshop service manual.

 

  • Workshop Manual
  • SECTION 1 GENERAL INFORMATION
    Group 1 Precautions for disassembling and
    Assembling
    Group 2 Tightening Torque
    Group 3 Painting
    Group 4 Bleeding Air from Hydraulic Oil Tank
    SECTION 2 UPPERSTRUCTURE
    Group 1 Cab
    Group 2 Counterweight
    Group 3 Main Frame
    Group 4 Pump Device
    Group 5 Control Valve
    Group 6 Swing Device
    Group 7 Pilot Valve
    Group 8 Pilot Shut-Off Valve
    Group 9 Signal Control Valve
    Group 10 Travel Shockless Valve
    Group 11 Solenoid Valve
    Group 12 Pilot Relief Valve
    Group 13 Steering Valve
    Group 14 Brake Valve
    Group 15 Accumulator Charging Valve
    Group 16 Transmission Control Valve
    SECTION 3 UNDERCARRIAGE
    Group 1 Swing Bearing
    Group 2 Travel Motor
    Group 3 Center Joint
    Group 4 Transmission
    Group 5 Axle
    Group 6 Axle Lock Cylinder
    Group 7 Operate-Check Valve
    Group 8 Propeller Shaft
    SECTION 4 FRONT ATTACHMENT
    Group 1 Front Attachment
    Group 2 Cylinder
    Group 3 Hose-Rupture Safety Valve
    Group 4 Operate-Check Valve
    SECTION 5 ENGINE

    Service Manual (Troubleshooting)
    SECTION 4 OPERATIONAL PERFORMANCE
    TEST
    Group 1 Introduction
    Group 2 Standard
    Group 3 Engine Test
    Group 4 Dumper Test
    Group 5 Component Test
    Group 6 Adjustment
    SECTION 5 TROUBLESHOOTING
    Group 1 General
    Group 2 Component Layout
    Group 3 Troubleshooting A
    Group 4 Troubleshooting B
    Group 5 Troubleshooting C
    Group 6 Electrical System Inspection
    Group 7 ICX

Reviews

There are no reviews yet.


Be the first to review “Kubota KC250H, KC250HR Dumper Workshop Manual”

You've just added this product to the cart: