Hitachi ZX210W ZAXIS Excavator Manual

Hitachi ZX210W ZAXIS Excavator Manual

$34.00

Format: PDF
Language: English
Service Manual consists of the following:

For Model ZX210W as mentioned above:

Service Manual (Troubleshooting) : Vol. No.TOCDBE (431 Pages)
Workshop Manual : Vol. No.WCDBE (703 Pages)
Parts Catalog: 678 Pages

Categories: ,
  • Description
  • Table of Content
  • Reviews (0)

Description

Hitachi ZX210W ZAXIS Excavator Manual

The manual is applicable for the Hitachi ZX210W Excavator Model

Format: PDF
Language: English
Service Manual consists of the following:

For Model ZX210W as mentioned above:

Service Manual (Troubleshooting) : Vol. No.TOCDBE (431 Pages)
Workshop Manual : Vol. No.WCDBE (703 Pages)
Parts Catalog: 678 Pages

SI Units (International System of Units) is use in the manual.

 Manual guide composition

Hitachi ZAXIS ZX210W service manual consists of the Operating, Troubleshooting and the Workshop Manual.

  • Information included in the Service Manual: Technical information needed for redelivery and delivery, operation and activation of all devices and systems, operational performance tests, and troubleshooting procedures.
  • Information included in the Workshop Manual: Technical information needed for maintenance and repair of the machine, tools and devices needed for maintenance and repair, maintenance standards, and removal / installation and assemble / disassemble procedures.

To avoid injury and damage refer to the service manual and be sure to use appropriate lifting techniques and equipment when lifting heavy parts.

A ZAXIS hallmark – industry-leading hydraulic technologies, and performance no other can beat. New ZAXIS provides reliable solutions: impressive fuel economy, swift front movements, and easy operation. You’ll also find Hitachi technological prowess and expertise, such as the optimize hydraulic system and engine.New ZAXIS features the key benefits of high quality, low fuel consumption, and high durability, all of which serve to ensure low running costs.New ZAXIS, which is empower by comprehensive evolution, will realize customers’ visions and dreams, and pioneer your colorful future

Bleeding Air from Hydraulic System General Instructions Manual Extract:

Bleeding Air from Hydraulic System When hydraulic oil is drained, the suction filter or the suction lines are replaced, or the removal and installation of the pump, swing motor, travel motor or cylinder is done, bleed air from the hydraulic system in the following procedures:
IMPORTANT: If the engine is started with air trapped in the hydraulic pump housing, damage to the pump may result.
If the hydraulic motor is operated with air trapped in the hydraulic motor housing, damage to the motor
may result.
If the cylinder is operated with air trapped in the cylinder tube, damage to the cylinder may result.
Be sure to bleed air before starting the engine.
• Bleeding Air from Hydraulic Pump • Remove the air bleeding plug from the top of the pump and fill the pump housing with hydraulic oil.
• After the pump housing is filled with hydraulic oil, temporarily tighten the plug. Then, start the engine and run at slow idle speed.
• Slightly loosen the plug to bleed air from the pump housing until hydraulic oil oozes out.
• After bleeding all the air, securely tighten the plug.
• Bleeding Air from Travel Motor / Swing Motor • With the drain plug / hose on travel motor / swing motor removed, fill the motor case with hydraulic oil.

  • Workshop Manual
  • SECTION 1 GENERAL INFORMATION
    Group 1 Precautions for disassembling and
    Assembling
    Group 2 Tightening Torque
    Group 3 Painting
    Group 4 Bleeding Air from Hydraulic Oil Tank
    SECTION 2 UPPERSTRUCTURE
    Group 1 Cab
    Group 2 Counterweight
    Group 3 Main Frame
    Group 4 Pump Device
    Group 5 Control Valve
    Group 6 Swing Device
    Group 7 Pilot Valve
    Group 8 Pilot Shut-Off Valve
    Group 9 Signal Control Valve
    Group 10 Travel Shockless Valve
    Group 11 Solenoid Valve
    Group 12 Pilot Relief Valve
    Group 13 Steering Valve
    Group 14 Brake Valve
    Group 15 Accumulator Charging Valve
    Group 16 Transmission Control Valve
    SECTION 3 UNDERCARRIAGE
    Group 1 Swing Bearing
    Group 2 Travel Motor
    Group 3 Center Joint
    Group 4 Transmission
    Group 5 Axle
    Group 6 Axle Lock Cylinder
    Group 7 Operate-Check Valve
    Group 8 Propeller Shaft
    SECTION 4 FRONT ATTACHMENT
    Group 1 Front Attachment
    Group 2 Cylinder
    Group 3 Hose-Rupture Safety Valve
    Group 4 Operate-Check Valve
    SECTION 5 ENGINE

    Service Manual (Troubleshooting)
    SECTION 4 OPERATIONAL PERFORMANCE
    TEST
    Group 1 Introduction
    Group 2 Standard
    Group 3 Engine Test
    Group 4 Excavator Test
    Group 5 Component Test
    Group 6 Adjustment
    SECTION 5 TROUBLESHOOTING
    Group 1 General
    Group 2 Component Layout
    Group 3 Troubleshooting A
    Group 4 Troubleshooting B
    Group 5 Troubleshooting C
    Group 6 Electrical System Inspection
    Group 7 ICX

Reviews

There are no reviews yet.


Be the first to review “Hitachi ZX210W ZAXIS Excavator Manual”

You've just added this product to the cart: