Description

Massey Ferguson FC23 Front Mower Manual

Model: Mower FC23
Format: PDF
Language: English
Type: Workshop Service Manual
Publication No: 4283355M1

Massey Ferguson FC23 Mower Workshop Manual – 216 Pages

Manual Table of Content 

INTRODUCTION……………………………………………………………………………………………………………………………………………..01
DISASSEMBLY OF MAJOR COMPONENTS…………………………………………………………………………………………………….02
ENGINE ACCESSORIES…………………………………………………………………………………………………………………………………03
TRANSMISSION………………………………………………………………………………………………………………………………………………04
HYDROSTATIC TRANSMISSION……………………………………………………………………………………………………………………..05
POWER STEERING ………………………………………………………………………………………………………………………………………..06
REAR AXLE (4WD)………………………………………………………………………………………………………………………………………….07
HYDRAULICS …………………………………………………………………………………………………………………………………………………08
ELECTRICAL ACCESSORIES …………………………………………………………………………………………………………………………09
SERVICE STANDARDS…………………………………………………………………………………………………………………………………..10
MOWER DECK ……………………………………………………………………………………………………………………………………………….11
INDEX …………………………………………………………………………………………………………………………………………………………….12

Nuts and Bolts
• Special bolts are installed at several locations, make sure not to interchange other bolts.
• Bolts and nuts must be tightened to their specified torque with a torque wrench.
• ·When locking the bolts or nuts with wire or a lock washer, make sure to wind the wire paying sufficient attention to its winding direction and bend the lock washer for secure locking.
• When locking bolts and nuts with an adhesive, apply the adhesive on the thread and tighten securely.
• Apply an adhesive (THREE BOND TB1104) to parts through which there is any possibility of oil leaks, such as stud bolts and tapped through parts.
• Each lock nut must be tightened securely.
• When tightening bolts and nuts, refer to the tightening torque table.
After installation, each grease fitting must be filled with grease.
• When installing grease fittings, make sure to turn the fitting tips in a direction that will provide easy access for a grease gun.