Description

Kubota M59, TL1350, BT1200 Tractor Workshop Manual

Kubota Tractor Model M59, TL1350, BT1200
Publication: 9Y011-01120
Format: PDF
Language: English and French
Kubota M59, TL1350, BT1200 Tractor Workshop Manual – 607 Pages (English Version)
Kubota M59, TL1350, BT1200 Tractor Workshop Manual – 639 Pages (English Version)

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of KUBOTA Tractor M59, KUBOTA Front Loader TL1350 and KUBOTA Backhoe BT1200. It is divided into three parts, General, Mechanism and Servicing.
• General
Information on the tractor identification, the general precautions, maintenance check list, check and maintenance and special tools are described.
• Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y02101874 / 9Y021-18201) for the one which has not been described to this workshop manual.
• Servicing
Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication.

Valve Plate M59, TL1350, BT1200
1. Check the engagement of the valve plate (2), (3) and the anchor pin (1).
2. Pushing the valve plate against the anchor pin, lift it to remove.
3. Check the valve plate for foreign particles.
4. Clean the valve plate and dry with compressed air.
5. Check the valve plate for scratches, wear and erosion. (Run a finger nail across the valve plate surface. If worn, it will be felt.) 6. If worn or scored, replace.
• NOTE
• After checking, coat them with transmission oil.
• Valve plates are not interchangeable.

KUBOTA dealer is always ready to help so that your Tractor offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in this workshop service manual.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING

a Operate the Kubota M59, TL1350, BT1200 Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor M59, TL1350, BT1200 Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.