Description

Kubota B2050, B2350, B2650, B3150 Tractor Workshop Manual

Kubota Tractor Model B2050, B2350, B2650, B3150
Publication: 9Y111-09820
Format: PDF
Language: English
Kubota B2050, B2350, B2650, B3150 Tractor Workshop Manual – 539 Pages
Kubota B2650 Tractor Operators Manual – 110Pages

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the B2050, B2350, B2650 and B3150. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
– Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
– General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
– Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
– Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing All illustrations, photographs and specifications contained in this manual are of the newest information available at the time of publication

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING

a Operate the Kubota B2050, B2350, B2650, B3150 Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor B2050, B2350, B2650, B3150 Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.