Komatsu D475A-5 Dozer Service Manual

Description

Table of Content (Shop Manual)

01 GENERAL……………………………………………………………………………………………………………. 01-1
10 STRUCTURE, FUNCTION AND MAINTENANCE STANDARD…………………………………….. 10-1
20 TESTING AND ADJUSTING……………………………………………………………… 20-1
30 DISASSEMBLY AND ASSEMBLY …………………………………………….. 30-1
90 OTHERS……………………………………………………………………………………………………………….. 90-1

1. General Instructions
This section presents under one heading the basic information and procedures common to the sections on “Disassembly and Assembly”, “Testing and Adjustments”, “Troubleshooting”, and “Removal and Installation”. It is essential for the serviceman to thoroughly understand and know this section till it becomes a part of his common sense.

2. Structure and Function.
This section gives a detailed explanation of the “Structure” with details and drawings of the “Constituent Parts” and “block” or “circuit” diagrams, arranged for the serviceman, but also useful as a textbook for training service personnel. The Training Aids should is use to cover the basic theory in this Manual.

3. Testing and Adjustments.
Procedures of all the necessary “Tests” and “Adjustments” are describe with photographs showing the necessary measuring equipment and the location for making the measurements. This should aid the serviceman in his trouble shooting, checking and adjusting work.

4. Troubleshooting
Typical common troubles are listed and systematically described; with their causes and the procedures for finding and diagnosing the symptoms.
As it is impossible to list all of the possible troubles, the serviceman should study the sections covering the “Structure and Function” and “Testing and Adjustments” and apply this knowledge to diagnose any non-listed troubles.

5. Manual Specifications
In this section, all standard dimensions and tolerances that are necessary to perform Testing and Adjustments is mention with drawings together with, appropriate procedures for disassembly and assembly, performing repairs, or troubleshooting. However, basic dimensions and tolerances, for repairs or rebuilding, are limited to those machine parts most commonly worked on.

Error code display mode 3-FAULT CODE DISPLAY MODE
In this mode, the contents of each fault in the machine are displayed by a 6-character error code on the multi-information section (2).
When the user or the operator needs to be notified of the error code of each fault, this mode is applied.
– Gear speed display section (1) keeps displaying normally.
– When a serviceman needs to check the error codes for troubleshooting, the Electric system error code display mode and the Mechanical system error code display mode should be used for more detailed information.
– Method of checking error code:
Turn buzzer cancel switch (4) to the [U] position on the screen shown at right, and the all error codes detected currently are displayed at the interval of about 2 seconds. (To finish displaying, turn the buzzer cancel switch to the [T] position.)