Description

Komatsu D475A-2 Dozer Service Manual

Komatsu Dozer Bulldozer D475A-2 Model
Language: English
Publication: SEBD019M0207
Format: PDF
Komatsu D475A-2 Service Manual – 621 Pages

Table of Content of the Komatsu Dozer D475A-2 Manual:

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-1
STRUCTURE, FUNCTION . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
TESTING AND ADJUSTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-1
DISASSEMBLY AND ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-1
MAINTENANCE STANDARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-1

This shop manual has been prepared as an aid to improve the quality of repairs by giving the serviceman an accurate understanding of the product and by showing him the correct way to perform repairs and make judgements. Make sure you understand the contents of this manual and use it to full effect at every opportunity.

This shop manual mainly contains the necessary technical information for operations performed in a service workshop. For ease of understanding, the manual is divided into the following chapters; these chapters are further divided into the each main group of components.

STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give
an understanding of the structure, but also serves as reference material for troubleshooting.

TESTING AND ADJUSTING
This section explains checks to be made before and after performing repairs, as well as adjustments to be made at completion of the checks and repairs. Troubleshooting charts correlating “Problems” to “Causes” are also included in this section.

DISASSEMBLY AND ASSEMBLY DOZER D475A-2
This section explains the order to be followed when removing, installing, disassembling or assembling each component, as well as precautions to be taken for these operations.

MAINTENANCE STANDARD
This section gives the judgement standards when inspecting disassembled parts.

When removing the connectors from the clips, pull the connector in a parallel direction to the clip.
* If the connector is twisted to the left and right or up and down, the housing may break.
2. When disconnecting male and female connectors, release the lock and pull in parallel with both hands.
* Never try to pull out with one hand.
3. When the wiring harness clamp of the connector has been removed, always return it to its original condition and check that there is no looseness of the clamp.