Case CX180C Crawler Excavator Service Manual

Description

Table of Content (Service Manual)

1. Content
2. Introduction
3. Engine
4. Hydraulics System
5. Frames and Ballasting
6. Tracks and Track Suspension
7. Cab Climate Control
8. Electrical System
9. Booms, dippers and buckets
10. Platform, cab, bodywork and decals
11. Special Tools Index
12. Hydraulic Schematics
13. Electrical Schematics

Manual Extract: Boom regeneration

When the boom plunger is operated to the lower side, the plunger moves to the left, and the oil from the pump opens the load check valve and is fed to the cylinder rod side from the feed path.

The bottom side return oil opens the load holding valve poppet and flows through the back pressure check valve and into the tank path, but the pressure is boosted by the back pressure check valve. Part of it opens check valve A and is regenerated on the rod side and part of it opens check valve B and flows through the inside of the plunger and into the foot relief valve through the center bypass path to lower the pump flow.