Case CX14 Excavator Service Manual

Description

Table of Content (Service Manual)

1. Specification
2. Maintenance
3. System
4. Disassembling
5. Troubleshooting
6. Engine
7. Installation Procedures for Optional Attachments

Manual Extract:

DISASSEMBLING AND ASSEMBLING HYDRAULIC EQUIPMENT

Removing hydraulic equipment
1) Before disconnecting pipes, release the hydraulic pressure of the system, or open the return side cover and take out the filter.
2) Carefully drain oil of the removed pipes into a containers without spilling on the floor.
3) Apply plugs or caps on the pipe ends to avoid oil spillage and dust intrusion.
4) Clean off the external surface of the equipment before disassembling, and drain hydraulic and gear oil before placing it on the workbench.

Disassembling hydraulic equipment
1) Do not disassemble, reassemble or modify the hydraulic equipment without the permission of the manufacturer, who is not responsible for the performance and function of the product after reassembling.
2) When disassembling and reassembling for unavoidable reason, refer the work to qualified personnel who have the specific knowledge or completed the parts service training.
3) Provide matching marks to facilitate reassembling work.
4) Before starting the work, read the manual of disassembling procedure, if it is provided, and decide whether the work can be performed by yourself.