Case 650M Crawler Dozer Service Manual

Description

Table of Contents

1. Contents
2. Introduction
3. Maintenance
4. Engine
5. Power Coupling
6. Hydrostatic Drive
7. Brakes and Controls
8. Hydraulic Systems
9. Hitches, drawbars and implement couplings
10. Tracks and Track Suspension
11. Cab Climate Control
12. Electrical System
13. Lubrication System
14. Dozer Blade and arm
15. Tools
16. Platform, cab, bodywork and decals
17. Specials Tool Index
18. Electrical Schematics
19. Hydraulics Schematics

Manual Extract: Fuel Prefilter

1. Open the right-hand side rear access door to locate the fuel prefilter cartridge (1).
2. Close the fuel shut off valve (2) to prevent fuel leakage.
3. Clean the outside of the fuel prefilter cartridge (1), fuel prefilter cartridge head (3) and remove any dirt and debris around the area that might contaminate the system.
4. Disconnect the wire harness (4) and remove the fuel prefilter cartridge (1).
5. Apply a thin layer of clean oil to the gasket on the new fuel prefilter cartridge (1).
6. Install and tighten the new fuel prefilter cartridge (1) by hand. Tighten the filter 1/2 to 3/4 turn after the filter cartridge gasket makes contact with the prefilter head (3).
7. Reconnect the wire harness (4).
8. Open the fuel shut off valve (2) and check for leaks.