Case 580K Loader Backhoe Service Manual

Description

Table of Content (Service Manual)

1. General
2. Engine
3. Fuel System
4. Electrical
5. Steering
6. Power Train
7. Brakes
8. Hydraulics
9. Mounted Equipment

Manual Extract Measuring Toe-In

1. Raise the front of the machine until the front wheels are free of the floor.
2. Hold a tool that has a sharp point against the center of the tire tread.
3. Hold the tool in one place and rotate the wheel to make a fine line around the tire. Repeat this procedure for the other front wheel.
4. Lower the front wheels to the floor.
5. Turn the steering wheel as needed to put the front wheels in the straight position.
6. Measure the distance between the marks at the front and rear of the tires.
7. The measurement at the rear of the tires must be 0 to 3/16 inch (Oto 5 mm) more than the measurement at the front of the tires.