Case 450, 465, 450CT Series 3 SkidSteer Service Manual

Description

Table of Content (Service Manual)

1. Introduction
2. Distribution Systems
3. Power Production
4. Power Train
5. Travelling
6. Body Structure
7. Working Arm
8. Tools and Couplers

Manual Extract: Oil cooler – Install

1. Install the second auxiliary oil cooler into the mounting location.
2. Install and tighten the mounting bolts in the oil cooler mounting bracket.
3. Start the vacuum pump. Reservoir -Apply vacuum (A.10.A)
4. Remove the caps from the fittings and plugs from the hoses.
5. Install the hydraulic lines onto the oil cooler and tighten the fittings.
6. Stop the vacuum pump.
7. Remove the vacuum pump from the reservoir.
8. Start and run the engine at low idle for 2 to 5 minutes and check for any leaks.
9. Check the oil level in the hydraulic reservoir and add oil as required. Reservoir – Filling (A.10.A)