Description

BT P20 Pallet Truck Manual

Pallet Truck Model: P20
Publication 178826-040
English 2002
Format: PDF

BT P20 Pallet Truck Service Manual: 98 Pages

Pallet Truck Manual Table of Content:

• Technical data
• Introduction Maintenance
• Preventive maintenance
• Oil and grease specification
• Tools
• Electric drive motor
• Drive unit/gear
• Electro magnetic brake
• Steering system
• Electrical systems
• Hydraulic/pneumatic system
• PowerTrak cylinder
• Control/computer equipment

Only personnel that have been trained in the service and repair of this type of truck are authorised to carry out service and repair work.
• Do not carry out any maintenance work on the truck unless you have the correct training and knowledge to do so

Dismantling/assembling of motor from truck

• Switch off the truck and pull out the battery plug.
• Remove the covers for the motor compartment.
• Release the cables for the motor and tiller arm.
• Unscrew the four nuts for the attachment of the motor to the drive gear.
• Loosen the cables for the key switch and emergency switch. Pull out all the cables from the cover’s cable duct.
• Loosen the cover over the motor compartment and the tiller arm’s mounting from the motor. Remove the cover over the motor compartment together with the tiller arm.
• Carefully lift the motor straight up, without damaging the sealing surfaces to the drive gear and place the motor on a clean surface.
• Protect the drive gear from impurities by covering over its opening in an appropriate manner, e.g. with a piece of plastic.
The requisite service and repair of the motor can now be carried out.