Case CX75C SR Midi Excavator Service Manual

$36.00

Case CX75C SR Midi Excavator Service Manual – 2357 Pages
Case CX75C SR Tier 4 Excavator Service Manual – 2365 Pages
Including Hydraulics and Electric Schematics

Publication Number: 47575329A & 47575334A
English
July 2013
Format: PDF

 

 

Categories: ,
View cart

Description

Case CX75C SR Midi Excavator Manual

Midi Excavator Model: CX75C SR
Publication Number: 47575329A & 47575334A
English
July 2013
Format: PDF

Case CX75C SR Midi Excavator Service Manual – 2357 Pages
Case CX75C SR Tier 4 Excavator Service Manual – 2365 Pages
Including Hydraulics and Electric Schematics

Manual Table of Content:

  1. Content
  2. Introduction
  3. Engine
  4. Hydraulics System
  5. Frames and Ballasting
  6. Tracks and Track Suspension
  7. Cab Climate Control
  8. Electrical System
  9. Booms, dippers and buckets
  10. Dozer Blade and Arm
  11. Platform, cab, bodywork and decals
  12. Special Tools Index

Manual Extract: Travel motor – Initial pre-conditioning operation

Slowly operate the machine and perform air-bleeding for inside the motor circuit and inside the line according the Operator’s Manual for the Machine Main Unit.

First, perform an operation check by repeating “C direction rotation and stopping and A direction rotation and stopping” a number of times at low-speed rotation.
At this time, remaining air inside the circuit may cause abnormal noises from the valves, etc. The abnormal noises will stop as air is bled out while operation is done repeatedly at low speed.
If abnormal noises go away through repeated operation over a while, there is no problem with the motor and it can be used as is.

If operation is done repeatedly and abnormal noises do not stop, there is an abnormality within the motor and it should be replaced.

Check for the presence of oil leaking from the motor, line port sections, each line and each piece of equipment.
When oil leaking has been confirmed, retighten the bolts and line joints at the location where the leak is occurring to the specified torque.

After checking is completed, raise the pressure and perform load operation, and check that no abnormal noises or vibrations, etc. are occurring in the motor.

NOTICE:
• When tightening lines, etc. after confirming oil leaking, make sure to have operation of hydraulic devices stopped.
• Make sure that the operating pressure on the motor is low when checking for oil leaking.
If the operating pressure is high and there is oil leaking, there is the danger of oil spraying out.

 

Reviews

There are no reviews yet.


Be the first to review “Case CX75C SR Midi Excavator Service Manual”