Case 750M Crawler Dozer Service Manual

$36.50

Case 750M Dozer Service Manual – 2007 Pages & 2011 Pages

Publication Number: 48080038 & 51418565
1st edition
English
April 2017 &  November 2017
Format: PDF

Categories: ,
View cart

Description

Case 750M Crawler Dozer Manual

Dozer Model: 750M
Publication Number: 48080038 & 51418565
1st edition
English
April 2017 &  November 2017
Format: PDF

Case 750M Dozer Service Manual – 2007 Pages & 2011 Pages

Manual Table of Content:

  1. Contents
  2. Introduction
  3. Maintenance
  4. Engine
  5. Power Coupling
  6. Hydrostatic Drive
  7. Brakes and Controls
  8. Hydraulic Systems
  9. Hitches, drawbars and implement couplings
  10. Tracks and Track Suspension
  11. Cab Climate Control
  12. Electrical System
  13. Lubrication System
  14. Dozer Blade and arm
  15. Tools
  16. Plateform, cab, bodywork and decals
  17. Specials Tool Index
  18. Electrical Schematics
  19. Hydraulics Schematics

Manual Extract: Track roller Lower roller – Filling

Prior operation:
Track roller Lower roller – Leakage test (48.138).
1. Turn the shaft so that the mounting surface of the end cap is down and the filler opening is up.
2. Fill the roller with the lubricant, refer to Capacities.
3. Connect an air line that can be controlled to a maximum pressure of 275 kPa, 2.7 bar (40 psi) to the filler hole.
4. Open the valve for the air line to push the lubricant into the outer ends of the roller.
5. Close the valve and disconnect the air line from the roller.
6. Check the oil fill volume by positioning the roller so the oil fill hole is at the top of the roller.
7. Insert a dip stick into the oil fill hole until it contacts the tip of the roller or the idler shaft.
8. The dip stick should read an oil volume level of 5.0 to 8.0 mm (0.195 to 0.315 in) above the top of the shaft.
9. Install and tighten the plug.

Reviews

There are no reviews yet.


Be the first to review “Case 750M Crawler Dozer Service Manual”