Case 680CK Loader Service Manual

$36.00

Case 680CK Loader Service Manual – 498 Pages
Case 680CK Series C Loader Service Manual – 623 Pages
Case 680CK Series E Loader Service Manual – 706 Pages

Publication Number: 9-72595
English
November 1980
Format: PDF

Categories: ,
View cart

Description

Case 680CK Loader Manual

Loader Model: 680CK
Publication Number: 9-72595
English
November 1980
Format: PDF

Case 680CK Loader Service Manual – 498 Pages
Case 680CK Series C Loader Service Manual – 623 Pages
Case 680CK Series E Loader Service Manual – 706 Pages

Manual Table of Content:

  1. General
  2. Engines
  3. Fuel System
  4. Hydraulics
  5. Steering
  6. Power Train
  7. Brakes
  8. Electrical
  9. Mounted Equipment

Manual Extract Cylinder Check

a. If checking loader lift cylinders, drive the machine onto blocks that are high enough to completely retract the lift cylinders. Completely retract the lift cylinders and shut off engine. Remove the tube to the closed end of a lift cylinder.
b. If checking the tilt cylinders, completely retract the tilt cylinders and shut off engine. Disconnect the hose at the closed end of one of the cylinders.
c. To check any other cylinder, run cylinder to end of stroke. Shut off engine. Provide supports to prevent collapse of attachment (if required), then disconnect hose or tube on the return side of the cylinder.
d. Start the engine and run at half throttle. Move the control lever into the same position as in step 2a, 2b, or 2c, and hold in place. System pressure will now rise to the setting of the main relief valve. Check for leakage through the open line. Any leakage indicates worn cylinder packing; however, slight leakage is permissible.
e. If leakage is found, remove the defective cylinder and repair. Recheck circuit operation. If the problem is not completely remedied, there is additional leakage in the control valve.

Reviews

There are no reviews yet.


Be the first to review “Case 680CK Loader Service Manual”