Case 1021G, 1121G Wheel Loader Service Manual

$37.00

Case 1021G, 1121G Loader Service Manual  – 2951 Pages & 2233 Pages

Publication Number: 48083742 & 51428221 & 51428268
English
July 2018 & November 2017
Format: PDF

Categories: ,
View cart

Description

Case 1021G, 1121G Wheel Loader Manual

Loader Model: 1021G, 1121G
Publication Number: 48083742 & 51428221 & 51428268
English
July 2018 & November 2017
Format: PDF

Case 1021G, 1121G Loader Service Manual  – 2951 Pages & 2233 Pages

Manual Table of Content:

  • Content
  • Introduction
  • Engine
  • Transmission
  • Four Wheel Drive
  • Front Axle
  • Rear Axle
  • Brakes and Controls
  • Hydraulic System
  • Brakes and Controls
  • Frames and Ballasting
  • Steering
  • Wheels
  • Cab climate control
  • Electrical System
  • Front Loader and Bucket
  • Plateform, Cab, Bodywork and Decals
  • Special Tool Index

Manual Extract: Oil cooler/Heat exchanger – Remove

1. Park the machine on a level surface and lower the bucket to the ground. Stop the engine and apply the parking brake.
2. Raise the engine hood.
3. Place the timed disconnect switch in the OFF position.
4. Open the frame of the engine cooling system.

5. Loosen the filler cap on the hydraulic reservoir to release the air pressure in the reservoir. Connect a vacuum pump to the hydraulic reservoir, turn on the pump.

6. Disconnect the top hose and install a plug in the hose and a cap on the fitting.
7. Disconnect the hose from the bottom of the oil cooler.
Install a plug in the hose and a cap on the fitting.

8. Loosen and remove the bolts (1) and the washers (2) that fasten the oil cooler to the cooling frame. Remove the oil cooler from the machine.

 

Reviews

There are no reviews yet.


Be the first to review “Case 1021G, 1121G Wheel Loader Service Manual”